Avol ARC-U1 Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Avol ARC-U1. Avol ARC-U1 9 pages.

AVOL Universal Remote Controller

Setting the Code

I. Entering the Code Number

See the supplied "code list" and find the three digital code number for the desire one.

Press and hold the corresponding set button(if you want to set up the device of TV, then press "TV"

button as set button,) until the current device indicator light lights(about 3secs),then release the

current device button. [Or press "SET" button +the corresponding device button at the same time,

for example, TV, then the current device indicator light lights.]

Entering the code numbers you selected. After every entering, the device indicator light will flash

one time. After all the three digit number is entered, the indicator light will turn off and exit the setting

status. If the code is not valid, the indicator light will flash two times then light on, waiting for entering

correct three digit number.

Attn：

Entering the status of set up, it will exit automatically if no buttons pressed during 15secs by the

indicator light flashing four times.

Entering the status of set up, if press the buttons except number buttons,there is no action. Press

"SET"or other device buttons to exit.

Can enter any code number under any device.

II. Searching for Correct Codes for Certain Brand

Press the corresponding device [TV] button you want to set up and then the corresponding digit

number button [1] at the same time, the current device indicator light lights.( Or press the

corresponding device [TV] button you want to set up by one time , and then press "SET

button"without release, then press the corresponding digit number button [1] , the current device

indicator light lights too.)

After about 2secs, the universal remote sends one set of datas for power buttons every 1.5secs, the

current device indicator light flashes simultaneously.

When the current device has some action(such as TV is power off), release the two buttons when

you pressed and saved the code by pressing "SET" button to exit the searching status. The

indicator light will turn off.

Attn：

- 2 -