Avolites AvoKey Manuel d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Avolites AvoKey. Avolites AvoKey 12 pages. Hardware installation guide for upgraded tiger touch consoles using the fujitsu d3243 mb upgrade (f-v10 upgrade)
Également pour Avolites AvoKey : Manuel d'installation du matériel (6 pages)
Imprimer la page
2.
Tiger Touch Pro
Fujitsu D3243 (
Place the console on a stable base
Assure that the Console is not connected to the mains supply
Open the console by removing the three screws at the front edge of the console, these
screws may be No.2 Pozi drive or T20 Torx, lift the front and hook the stand on the right
side of the console to the moulding fixing.
Locate the USB Hub board near the front edge
Consoles with the UPS Board fitted
Check if the UPS board USB connection is directly to the MB
If it is directly connected to the MB, go to step xx
2.1
U-UPS connected to the U-Hub
UPS board USB connected to U-HUB PCB
A. Unscrew the two fixings then remove the cable retention comb
B. Disconnect UPS USB cable from USB-6 port
C. Re-fit the cable retention comb and secure with the retained fixings (M3x12
screw, spring washer & flat washer). Push the comb in the direction of the arrows
before tighten the screws
D:\Data\products\AVOKEY\release\8000-6103 TTPro-FV10-AVOKEY upgrade with 1221-2041 and 1221-2045.docx
GK 11 October 2019
8000-6103 - AvoKey Installation Guide
F-V10 upgraded units
Page 5 of 12
)