Billet Specialties 13820 Manuel d'installation - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Billet Specialties 13820. Billet Specialties 13820 20 pages. Small block chrysler
Imprimer la page
Figure 15: Install Belt &
A
Tensioner Pulley
A] Apply anti-seize to one
3/8-16 x 3/4" ARP 12-point cap
screw.
Route serpentine belt as shown
below - minus tensioner pulley.
Place a 5/8" box end wrench
on tensioner.
B
B] Align belt onto pulley and pull up
on wrench to release tension until
tensioner pulley slips onto
tensioner shaft.
Slowly return wrench to starting
position to apply tension to belt.
C] Remove wrench and install the
C
3/8-16 x 3/4" ARP 12-point cap
screw with thrust washer onto pulley
and tighten firmly (46 ft/lbs).
With Power Steering
Without Power Stering