Aqua One Ocellaris 3000 Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aqua One Ocellaris 3000. Aqua One Ocellaris 3000 13 pages.

Maintenance

20. Return the canister filter to your cabinet or stand

and reattach the taps.

21. Refer to the section in this instruction manual

Starting You Filter for details on restarting the unit

Trouble Shooting

The filter unit is leaking

1. Check that all o-rings are in place and that they are

not damaged or soiled.

2. Re-apply aquarium safe lubricant to o-rings.

3. Check that the media baskets are aligned properly.

4. Ensure that the quick release tap connector is

inserted correctly and locked into position.

The filter will not prime

1. Check the tubing for kinks.

2. Ensure that the quick release tap connector is

inserted correctly and locked into position.

3. Check that the aquarium is filled with water.

4. Make sure that the intake pipe and/or intake strainer

are not blocked.

5. Ensure that the hoses are connected to the unit

correctly. Intake strainer to IN and duckbill outlet or

spray bar to OUT.

The filter will not start

1. As previous tips.

2. Check the impeller and shaft are in good condition.

3. Verify that the filter is plugged in.

Low water flow

1. As both previous tips.

2. Clean or replace the filter media.

3. Clean the inlet and outlet pipes.

4. Clean all tubing.

Both water & air coming from

the outlet pipe

1. Leave for 3-5 minutes.

2. Make sure that no air stone is operating near the

intake strainer.

3. Check all tubing is connected firmly.

4. Check all o-rings and re-apply aquarium safe

lubricant.

5. Gently rock the filter back and forth trying to discharge

the air in the canister.

The filter is making noise

1. As per previous tips

2. Outlet or inlet flow is restricted. Check tubing.