CP Electronics AR-SG-4SM-W Manuel du produit - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} CP Electronics AR-SG-4SM-W. CP Electronics AR-SG-4SM-W 13 pages. The ar-sg-4sm-w is a stylish push-button wall plate that provides control of an an-10 system.

Imprimer la page

Button Behaviour

Changes in the state of an input (e.g. from inactive to

active) generate different events that can then be used to

trigger various control functions.

The events generated depend on whether momentary or

latching mode is selected (via the Switch Type parameter -

"Param Set").

Control Functions

Each type of input event can be used to trigger any of the

following control functions:

 Scene Select

used to select a specific lighting scene. Depending on

the input channel addressing both Local and/or Area

scenes can be selected.

 Scene Raise or Lower

used to increase or decrease the overall lighting levels

for the currently active scene.

Programming notes

 By default at first Power On Addressing parameters will be set to default values. Set addressing parameters as

required.

 To configure custom parameters from the handset. Navigate to "Input channels", AN10 Select Product AR-SG-

4SM Input Channels. Using the Channel Button, select the particular channel to be configured or select "ALL

channels" to configure all channels. Scroll down to "Buttons events" and select the correct "Param Set" number for

the type of switch and operation required (see page 7 of product guide).

 Next navigate to "Input Function", select and send the required input function number for each input (see opposite).

Example. On scene Recall on input 1, select input 1 using the channel button, and send a "Input Function" number 1,

for Off scene recall on input 2, select input 2 and send "Input Function" number 2.

 If it is set to NONE for particular input no action will be generated.

Parameter Name

Default Value

Device Addressing - This will set the addressing parameters for all the channels in Scene Plate.

Local Code

Sub Local Code

Not set

Area Code(s)

Not set

Product ID

Automatically

assigned by the

device

Building Code

Individual Input Channel - If a particular channel needs to be modified, press channel button and select particular channel number.

Addressing

Same method as device addressing above. The addressing for each individual input can be changed.

Advanced programming (UNLCDHS)

Range / options

1 to 999

1 to 99

0 to clear

1 to 999

 Circuit Absolute Level

used to set the level of a specific output channel.

 Circuit Raise or Lower

used to increase or decrease the level of a specific

output channel.

 Sequence Control

used to start, stop or pause a sequence of scenes.

 Override Control

used to select global override scenes, typically during

emergency situations (e.g. fire evacuation).

 Emergency Test

used to test device/systems for correct operation during

a mains power failure.

The table below and on page 7 gives a summary of all

programmable parameters for the AR-SG-4SM-W Scene

Plate.

Description

This number denotes the local code for all input channels available.

A number corresponding to the Sub Local Code to be controlled by

the associated input channel.

A number corresponding to the Area Code of all input channels. Up to

10 area codes can be set for each channel.

A number used to uniquely identify each device within a range of

devices that are set to the same Local Code.

A number shared by all devices that belong to the same building or

system.