Billi B-4000 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Billi B-4000. Billi B-4000 13 pages. Instant boiling and ambient filtered water system
Également pour Billi B-4000 : Manuel d'installation (8 pages)

Imprimer la page
User guide
B–4000.
– WARNING: Do not connect any restrictor or
pressure relief device to the vent pipe of this
water heater if installed.
– If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid creation of a hazard.
– New hose sets supplied with the appliance
are to be used. Old hose sets should not
be re-used.

Cupboard space requirements

Your Billi B–4000 underbench module requires
no cupboard ventilation but requires air space
around the unit of 25mm. Care should be
taken when using the cupboard space to avoid
stretching or damaging plastic pipe work.
Check fittings and tubing at each filter change
for signs of damage or leakage. Always ensure
access to power switch and water supply tap
is not restricted.

General maintenance

Your Billi B–4000 has been designed to require
minimal maintenance other than replacement
of filter cartridges. During each filter change,
check all water connection fittings for signs
of leakage. Check all tubing for any signs of
damage. Check the cupboard area around the
base of unit for any signs of moisture. Ensure
side vents of the underbench module are kept
clear and airflow is not obstructed.

Cleaning the dispenser

Your Billi B–4000 Dispenser is fabricated from
robust metal with a tough protect chrome
plating. Care of dispenser is as with any
chrome plated tap ware. Avoid using abrasive
cleaners. Wipe clean using a damp cloth. Use
of a non-solvent, non-smearing cleaner such
as Windex is recommended. Do not pour water
over dispenser.

Caution and safety

Boiling water is dangerous and can cause
severe burns, particularly with young children.
Boiling water must always be handled with
caution. Use this appliance only as directed
in these instructions and only for the purpose
for which it has been designed. Your Billi
B–4000 is designed to be safe and practical.
In an environment with young children, it is
recommended that the boiling water safety
switch is activated.
The following safety features have been
included:
– Ergonomic levers control water flow.
– Levers located safely above water outlet.
– Smooth electronically controlled boiling
water flow rate. Flow is briefly reduced as
water first enters cup to prevent splashing.
– Dispenser remains cool to touch.
– Childproof safety switch.
– Boiling water safety isolation mode.
5