Billi B-5000 Sparkling Manuel de l'utilisateur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Billi B-5000 Sparkling. Billi B-5000 Sparkling 16 pages. Tap option xl
Également pour Billi B-5000 Sparkling : Manuel d'installation (4 pages), Manuel d'installation (7 pages)
Imprimer la page
User guide
Billi B-5000 – XL, XT, XR.
Filter removal and
replacement instructions
Important note: Please ensure you remove the
foam packing under the filter before installing .
1 . Remove the front panel .
2 . Place the unit in Holiday Mode by
pressing the Pressure Relief button once .
The lights on the dispenser will alternate
and then go off
3 . Hold filter and swing towards you slowly .
The top of the filter is in a hinged cradle
assembly . It should stop after approximately
30 degrees of travel .
4 . The filter can now be released from the
holding cradle by pulling down on the filter .
5 . Take care not to spill water in the base of the
tray . If so wipe gently with absorbent paper .
6 . Install new filter into the same location
by pushing all the way up into the cradle .
7 . Push filter back into the unit until it locks
into place . Power light should come back on .
8 . Flush chilled side until water flow stops .
Wait 10 minutes .
Repeat these steps 2 times .
9 . Check for any leaks from around the
filter, hosing or pipeworks .
10 . Replace the front cover .
11