Allied Systems Long Reach BHA Series Manuel d'installation, de maintenance et d'entretien - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation, de maintenance et d'entretien pour {nom_de_la_catégorie} Allied Systems Long Reach BHA Series. Allied Systems Long Reach BHA Series 20 pages. Billet handler

Imprimer la page

Training

• Make sure all operators are trained in the fork and

attachment adaptation, operation, and use limitations.

Retrain an operator if a new attachment is added to

the forklift. Consult the operator's manual for instruc-

tions on how to use the new equipment.

• Know the mechanical limitations of your forklift.

• Modifications or additions that affect capacity or safe

operation must have prior written approval from the

forklift truck manufacturer. Capacity, operation, and

maintenance instruction plates, tags, or decals shall

be changed accordingly.

• Never use free rigging for a below-the-forks lift. It could

affect the capacity and safe operation of a lift truck.

Labeling

• Change capacity, operation, and maintenance instruc-

tion plates, tags, or decals when a forklift truck is

equipped with an attachment. If the truck is equipped

with front-end attachments other than factory installed

attachments, truck must be marked to identify the

attachments and show the approximate weight of

the truck and attachment combination at maximum

elevation with load laterally centered.

Pre-start Checks

• Check your equipment before you operate it. If any-

thing looks wrong, unusual or different, report it before

using the attachment.

• Do not operate this machine if you know of malfunc-

tions, missing parts, and/or mis-adjustments. These

situations can cause or contribute to an accident or

damage to the machine. Stop the machine immedi-

ately if problems arise after starting.

• Check to make sure the attachment on your truck is

the same as on the truck capacity plate.

• Check for hydraulic leaks and cracked hoses or fittings.

Check the hydraulic oil level in the lift truck hydraulic

reservoir.

• All electrical cables and connectors must be in good

condition. Use caution in wet weather to avoid danger

from electrical shock.

• Always check the attachment for proper fit and en-

gagement of the truck carriage.

45-053, REV. 5/18

Personnel Safety

• When removing or installing dismountable at-

tachments always keep hands and feet free from

dangerous positions or pinch points. Never leave a

dismounted attachment in a dangerous position.

• Keep hands, feet, long hair and clothing away from

power-driven parts. Do not wear loose fitting clothing

or jewelry while performing maintenance and lubrica-

tion in these areas.

• Never jump on or off the machine.

• Never stand on top of material being raised, lowered,

or transported. (Figure 1)

Figure 1

Figure 3

• Never use the attachment or its load to support a

man-carrying device.

• Never allow anyone under a load or under the car-

riage. (Figure 2)

• Never stand in front of or beside an attachment that

is being operated. Never allow another person to ap-

proach an attachment that is being operated. (Figure

• Never leave an attachment or load in an elevated position.

• Never reach through the mast of the truck. Keep all

parts of the body within the driver's compartment.

• Always operate an attachment from the operator's

seat, never while standing next to the lift truck.

• Do not allow riders on the truck at any time.

Figure 2