AVOURY ONE Manuel de l'utilisateur - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AVOURY ONE. AVOURY ONE 20 pages.
Également pour AVOURY ONE : Manuel rapide (10 pages), Manuel de l'utilisateur (20 pages), Manuel rapide (3 pages)
Imprimer la page
CLEANING AND MAINTENANCE
TROUBLESHOOTING
EN
PAGE 38
PAG E 16
Carrying out the
Info: The first part of the programme
can begin. This process should be
is finished. In the second part the
repeated until the water tank has
descaling programme
appliance is rinsed with fresh water to
been emptied entirely.
remove the remainder of the descaling
When the "Descaling necessary"
After the rinsing programme has
agent.
LED
been completed, the pod is ejected
is illuminated, this means
13
18. Remove the water tank and pour out
that the descaling programme must be
and the LED "Water tank empty" will
any remaining liquid.
carried out. The programme lasts for
illuminate.
19. Rinse the water tank with fresh tap
approximately 20 minutes.
14. Fill the water tank with fresh tap
water.
1.
Switch on the tea maker.
water.
20. Put the water filter back into the
water tank if required.
2. Open the pod compartment
The descaling programme is complete.
21. Fill the water tank completely with
remove the sealing lm and insert a
fresh tap water and put it back in the
cleaning pod.
machine. The LED "water tank empty"
The LED "Descaling necessary"
/
10
goes off.
begins to ash and the
22. Empty the collecting vessel and
On/O button
illuminates.
9
remove the capsule drawer.
23. Empty the drip tray if necessary.
3. Press the On/O button to start the
Then reinsert the drip drawer
descaling programme.
and put the collecting vessel back
The LED "Descaling necessary" will
under the outlet.
ash throughout the entire cleaning
24. The LED "empty capsule container"
programme.
/
11
goes off and rinsing begins
The LED "Water tank empty"
automatically.
will go out.
Info: Rinsing is carried out in two
cycles. The liquid that has run through
4. Empty the water tank
the machine flows into the collecting
remove the water lter, if necessary.
vessel. When rinsing is finished the
5. Pour 250 ml of Avoury liquid desca-
descaling capsule is ejected.
ling agent and an additional 250 ml
25. The first cycle is finished when the
of tap water into the water tank.
Start-Button
/
9
6. Replace the water tank again.
continuously.
The LED "Empty pod basket"
26. Empty the collecting vessel and put
illuminates.
it back under the outlet.
27. Then press the Start-Button
7. Empty the drip tray and the pod
to start the second cycle.
basket
.
7
28. When the second cycle is finished
8. Replace both parts again.
the capsule is ejected automatically.
The LED "carry out descaling"
/
goes off and the
13
9. Place a container that holds at least
Start-Button
continuously.
300 ml volume under the outlet
The descaling programme is finished.
Descaling takes place in 250 ml
cycles. Once the descaling liquid
has passed through the system, it is
released into the container. Once a
cycle has been completed, the con-
tainer must be emptied and placed
under the outlet again. At this point,
press the On/O button to con rm
,
2
that the next cycle can begin. This
process should be repeated until
the water tank has been emptied
entirely.
After the rst part of the descaling
programme has been completed,
the "Water tank empty"
lights up.
10. Remove the water tank and tip away
the remaining liquid.
11. Rinse out the water tank with fresh
10
tap water.
12. Empty the container and place it
and
4
back under the outlet.
13. Fill the water tank with 500 ml tap
water and put it back in again.
The tea maker rinses the brewing
unit in 250 ml cycles with clear tap
lights up
water. The tap water that passes
10
through runs into the container.
Once a cycle has been completed,
/
9
the container must be emptied and
placed under the outlet again. At
this point, press the On/O but-
ton to con rm that the next cycle
/
9
lights up
.
8
LED
10
PAG E 17