CP Plus CP-TNW-HP4H1-6 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} CP Plus CP-TNW-HP4H1-6. CP Plus CP-TNW-HP4H1-6 4 pages. 4 port poe switch
Imprimer la page
Board Diagram
Front board
Back board
input port
Side board
Description：
1)
The equipment must connect the ground according to the request.
2
)
Turn the dial switch for left, the equipment can enter CCTV mode after restart the
equipment power.
Installation ste ps
Please check the following items before installation, if it is missing, please contact the dealer .
4 ports PoE Ethernet Switch
Power adaptor
AC power cable
User manual
Please follow the below installation steps
1) Please turn off the signal power and display device power before installation, installation
with power will damage the transmission equipment;
2) Use network cable connect PoE IP camera and 1～4 down link ports of product respectively;
3) Use a network cable connect equipment up link port and NVR or computer;
4) Turn on the power of the equipment;
5) Check if the installation is correct, equipment is in good condition, the connection is stable,
then provide power for system;
6) Ensure the Ethernet equipment with power and work properly.
CCTV mode
Power
PoE down link
Ethernet port
4 Port PoE Switch
Power
indicated light
Uplink
Ground
Ethernet port
Kensington Lock
1pc
1pc
1pc
set
1
2