AVPro Edge AC-SC2-AUHD-GEN2 Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AVPro Edge AC-SC2-AUHD-GEN2. AVPro Edge AC-SC2-AUHD-GEN2 17 pages. The ultimate toolbox: 18gbps signal manager, up/down scaler, edid manager, audio de-embedder
Également pour AVPro Edge AC-SC2-AUHD-GEN2 : Manuel de démarrage rapide (4 pages)

Imprimer la page
AVPro Edge AC-SC2-AUHD-GEN2 Manuel de l'utilisateur
AC-SC2-AUHD-GEN2

Troubleshooting

• Verify Power - When power is applied all lights on the front of the device will flash. You can also press
any of the 3 buttons on the side to change settings, the corresponding lights should change if the unit
is powered up.
• Verify Connections - Make sure all connected cables are properly connected.
o You can use the built in Test Pattern Generator to verify signal path from AC-SC2-AUHD-GEN2
to the display
• Source not syncing, default EDID is 0000 (all off) EDID BYPASS. If this is not working try one of the built
in EDIDs Pg.7, or Copy from the Display using the USER EDID.
o *NOTE - To copy, have USER EDID selected, then press and hold the EDID SETTING button for 3
seconds to copy the connected Displays EDID.
• Extracted Audio not working - This unit DOES NOT DOWNMIX, the source must be set to 2ch for the
extracted 5 pin balanced audio port to work.
• Still having issues, contact us
o Support Direct - +1-605-977-3477
o All inquiries - +1-605-274-6055
o Submit a support request ticket
 https://support.avproedge.com/hc/en-us/request
Page 11