Aqua PRO APC3000 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Aqua PRO APC3000. Aqua PRO APC3000 11 pages. Automatic pool cover pump

Imprimer la page

Installation

Always use the handle to lift the pump. Never use the power cord to lift the pump. To avoid skin burns, unplug

CAUTION:

the pump and allow time for it to cool after periods of extended use.

Connecting a 3/4 in. garden hose

connection

NOTE: Be sure the 3/4 in. garden hose thread connector

has a rubber gasket to minimize water leaks.

NOTE: The larger the inside diameter and the shorter the

length of hose, the less pressure that is lost (or the larger the

flow rate).

Attach a garden hose with a 3/4 in. garden hose thread (not

included) to the adaptor (B).

Operation

NOTE: Make certain you unwind the garden hose completely. Kinks in the hose will restrict the pump, preventing it from priming, which is

the first step to pumping water. This pump has water detector sensors. As long as the water level is over 2 in., the pump will automatically

start operating.

Place the pump on the pool cover or any place that you would like to remove water. And plug the pump power plug into a 115 volt GFCI

power outlet.

WARNING: Do not handle pump or pump motor with wet

hands or when standing on wet or damp surface, or in water.

WARNING: Do not let plug fall in water and do not stand in

water while the pump is plugged in.

Connecting a 1-1/4 in. hose kit

WARNING: Secure the discharge hose before plugging in

the pump. An unsecured discharge hose may "whip"

possibly causing personal injury, and/or property damage.

If you would prefer to use a 1-1/4 in. hose kit (not included) in

order to pump water away more quickly.

Securely attach the hose kit (not included) to the adaptor (B).

NOTE: The pump will not start working unless water level is

over 2 in.

NOTE: Place upright on a solid base.