CPAP PAP Clean PCS-300 Manuel - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} CPAP PAP Clean PCS-300. CPAP PAP Clean PCS-300 12 pages. Portable cpap cleaning system

Imprimer la page

Troubleshooting

Problem

It does not work

after turning on

Charging icon

does not

illuminate

No sound and

device stops

Battery is fully

charged and the

device is not

working

After 35 minutes,

machine does

not stop.

No ozone

generation

Specifications

Size - PAP Clean Bag

Size - Ozone Generator

Weight - Ozone Generator

Rechargeable Lithium Ion battery

Power

AC Adaptor Output

Operating temperature

Possible Solution(s)

Connect the product to the charger. Plug the

charger to power outlet. Turn on the product.

Make sure the battery has been charged for at

least one hour. Check the charger and USB

connection.

Battery is dead. Connect the device to power

and charge.

Check device and cord connection and make

sure you are using the supplied USB cable. If

this does not solve the problem, send the prod-

uct to your place of purchase for replacement.

Power the machine down by pressing and

holding the On/Off button for 3 seconds. Try the

cycle again. If unresolved, send the product to

your place of purchase for replacement.

If you have pressed the On/Off button and

there is no light and the fan is not working,

connect the device to the power charger and

plug the charger to an outlet. After the device

has charged, turn it on. If the working indicator

turns on with a green light but the fan still does

not work, send the product back to your original

place of purchase for replacement.

16" x 13.5" x 0.25"

4.5" x 2.5" x 1.75"

.5 lbs / 205 g

2600mAh

DC: 5V == 1A

50°F - 110°F