CPAT FLEX IRX1 Manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CPAT FLEX IRX1. CPAT FLEX IRX1 13 pages.

Imprimer la page

Modifications: Any modifications made to this device that are not approved by Effigis Geo-

Solutions Inc., may void the authority granted to the user by the FCC to operate this equip-

ment.

1.3 Technical Support

Effigis Technical Support Service is available from Monday through Friday from 9:00 AM to

5:00 PM Eastern Time.

Toll free from U.S. and Canada: + 1 888 495-6577

International: + 1 514 495-0018

Fax questions anytime to: + 1 514 495-4191

[email protected]

1.4 Calibration

Your IRX1 unit has been calibrated and tested in the factory, and does not need further

calibration before use.

However, if the unit suffers damage and needs repair, it is recommended that the unit be

return to an authorized Effigis service center there it will be properly re-calibrated.

As well, if your company requires regular calibration of all equipment, or requires a calibra-

tion certificate for the IRX1, a calibration service is available through Effigis.

For more information on calibration services, please contact your Effigis representative.

1.5 Explanation of Symbols Used

The following symbols are used in this Manual:

Symbol

Explanation

Caution. Indicates that operations or procedures, if carried out without caution, may

cause personalinjury or damage to the unit.

Note. Indicates additional information about the product.

1.6 Effigis Website

Effigis' website contains product specifications, information, press releases, brochure down-

load and Frequently Asked Questions (FAQs). Please visit our website at:

http://effigis.com

2. System Components

The IRX1 is the receiver part of a find-and-fix ingress solution for broadband operators. It

monitors signal transmitted over the air via the ITX1 that comes thru the cable network. The

IRX1 RF entries are feed from the head end tests point return. Global operating status is dis-

played on the LCD located on the front panel of the unit. Once installed, it requires no further

intervention to monitor and transmit results through CPAT web interface.

This section describes the IRX1 unit in detail including its accessories, and helps you get

started by explaining the features, the powering and data interface on the unit.

2.1 Initial Verification

Your IRX1 unit is calibrated, and ready to use right out of the box. Upon reception, visually

inspect each item for any damage that may have occurred during shipping. If you see any

signs of physical damage, please contact Effigis:

Make sure no items are missing. Your package should contain all the standard items as well

as any accessories you may have ordered. If you ordered the IRX1 - Head-end Based Return

Band Receiver kit, the following items are included:

CPAT FLEX (IRX1)

Operation Manual

• Callers from the U.S. and Canada can dial + 1 888 495-6577 (toll-free number).

• International callers can dial + 1 514 495-0018.

• IRX1 rack mount unit.

• 2 Rack mount right angle brackets.

• AC/DC adapter.

• User manual.

Figure 1: IRX1, rack mount brackets and AC/DC adapter

effigis.com