DFI KS-SD Series Manuel d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DFI KS-SD Series. DFI KS-SD Series 17 pages.

Panel mount

The panel mounting kit includes the following:

•

10 mounting clamps

1. Before starting any installation procedures, attach the poron foam to the

Panel PC.

2. Select a place on the panel (or wall) where you will mount the Panel PC.

3. Cut out a shape on the panel that corresponds to the Panel PC's rear

dimensions (15": 367mm x 300mm; 19": 447mm x 380mm; 21.5":

526.2mm x 342.6mm) and ensure that the Panel PC can be fitted into

the panel properly.

Mounting hole

Panel

4. Insert the Panel PC from the outside surface of the panel into the

mounting hole until it is properly fitted against the panel.

5. Position the mounting clamps along the rear edges of the Panel PC and

insert them into the slits around the Panel PC. Note that the following

diagram is for illustration only and may not resemble the actual product.

300

367