AVS Bugflector II Manuel d'instructions d'installation

Bugflector

For proper installation and best possible fit, please read all instructions BEFORE you begin.

For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.

Important Safety Information

• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.

• Do not use automatic "brush-style" car washes.

• Do not use cleaning solvents of any kind.

• Periodically check all components for tightness.

Contents

NOTE: Actual product may vary from illustration.

Tools Required

Car Wash Supplies

Preparation Before Painting / Installation

• A trial fit is recommended to ensure proper positioning and fit.

• Check fit of parts before painting as we will not accept the return of modified or painted parts.

• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.

Installation Steps

Open hood and locate the hood latch assembly, behind

Installation Instructions

- Bugflector II

Hood shield

Clean Towel

Phillips Screwdriver

NOTE: Actual application may vary slightly from illustrations.

the front grill.

- Carflector

Bump On x4

Screw x2

10 mm

Socket Wrench

Disconnect the latch assembly from the hood by

Page 1 of 3

I - Sheet Number BF33 Rev.B

Washer x2

Wrench

removing (2) screws with wrench.

Well Nut x2