Aqua Systems AQPC-35 Manuel d'installation, d'utilisation et d'entretien - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} Aqua Systems AQPC-35. Aqua Systems AQPC-35 20 pages. Tfc reverse osmosis drinking water system

Imprimer la page

SECTION III. PREPARATION

A. Major System Components
The following components comprise the R.O.
Drinking Water System. (Refer to Fig. 1, page 3 for
general system layout.)
•
An R.O. Manifold assembly.
•
Housings and Housing O–rings.
•
A Drinking Water Holding Tank.
•
A Dispensing Faucet.
•
A Feed Water Saddle Valve.
•
A Drain Clamp.
•
Plastic Tubing and tube connectors.
Close-up of Manifold
B
L
U
E
See Page 11
hOlDing tanK
shutOFF ValVe
(Open position)
7
6
DrinKing
water
hOlDing tanK
TyPICAL AqPC-35 UNDER SINk INSTALLATION DIAGRAM
5
FeeD water
saDDle ValVe
(cold water line Only)
•
A Reverse Osmosis Membrane sealed in a
plastic bag.
•
A Sediment/Carbon Prefilter, shrink wrapped.
•
An Activated Carbon Post Filter, shrink
wrapped.
•
Water Quality Test Kit.
•
Other items necessary for installation may
include wood screws or machine screws and
nuts for mounting the manifold, or concrete
anchors for hanging on basement wall,
additional tubing or tube connectors, plastic
wire ties for organizing tubing.
Drain
(3/8" Black)
lOcate Drain clamp
aBOVe "p" trap
tanK
(3/8" Yellow)
Figure 1
5
1
Dispensing
Faucet with
air gap
2
Drain clamp
cOVer
3
prODuct
(3/8" Blue)
4
Drain
(1/4" Black)
inlet
(1/4" red)
actiVateD
reVerse
4" min
carBOn
OsmOsis
pOst Filter
memBrane
hOusing
hOusing
rO maniFOlD
seDiment/
carBOn
preFilter
hOusing