AVS 6000 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AVS 6000. AVS 6000 7 pages. Alarm system

Imprimer la page

HOW TO CHANGE PROGRAMMING REGISTER 2

Vehicle setup:

Programmable

feature

Left button used for

another vehicle

Second button used

to arm/disarm this

vehicle

Not used

Silent operation

Valet mode

Central

closure/vacuum

locking

Not used

Installer mode

Drivers door open, bonnet closed, turn ignition on last

Number

Initial

factory

pushes

setting

OFF

Select

the

mode

required

Description

Allows your remote keys to be divided to act

like two separate single button remote keys

to control two separate vehicles. i.e. bottom

button controls vehicle "A", left button

controls vehicle "B". Simply teach the

remote to the other vehicle and see function

below. Only bottom button features can be

accessed. (i.e. boot release control is

unavailable).

Turn this feature on in your second vehicle if

you are utilizing the above feature.

When on this feature stops the siren from

sounding. The alarm will still trigger, flashing

the indicators and the pager output will still

operate.

When on, this feature allows 5 engine starts

before the system returns to its normal

operation. i.e. auto immobilisation and

passive arming if turned on.

When on, the lock pulse becomes 15 secs

instead of 0.5 secs. This feature is for

vehicles with vacuum locking or with a

central closure wire (some BMW, Mercedes)

which will close the windows and sunroof

automatically.

After pressing the remote 9 times to enter

this mode, turn the ignition to off. This mode

allows the installer/owner to verify that each

trigger of the alarm system is working,

without having to arm/disarm the system

each time and trigger the alarm. The siren

will beep and the indicators will flash to

indicate a trigger e.g. open a door, push the

bonnet switch. Turn the ignition on to exit

this mode.