CPG 351CPGSPR18 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CPG 351CPGSPR18. CPG 351CPGSPR18 13 pages. Stock pot range

Imprimer la page
USER MANUAL

SHIPPING DAMAGE CLAIM PROCEDURE

The equipment is inspected & crated carefully by skilled personnel before leaving our factory. The transportation
company assumes full responsibility for safe delivery upon acceptance of this equipment. If shipment arrives
damaged:
1.
Visible loss or damage: Note on freight bill or express delivery and have signed by person making delivery.
2.
File claim for damages immediately: Regardless of the extent of damages.
3.
Concealed loss or damage: If damage is noticed after unpacking, notify the transportation company
immediately and file "Concealed Damage" claim with the transportation carrier. This should be done
within fifteen (15) days from the date of delivery and receipt of goods. Retain container for inspection.

INSTALLATION INSTRUCTIONS

•
Installation of all equipment should be performed by qualified, certified, and authorized personnel who are
familiar and experienced with local installation codes.
•
Before installation, please read instructions completely and carefully.
•
Do not remove permanently affixed labels, warnings, or plates from the product.
•
Please observe all local and national codes and ordinances.
•
Installation must conform with local codes, or in the absence of local codes, the National Fuel Gas Code, ANS1
Z223.1 (latest edition). In Canada, installation should conform to installation codes for gas burning appliances
and equipment standard CAN/CGA-B149.1 or the propane installation code, CAN/CGA-B149.2, as applicable.
•
Electrical wiring to the appliance must be electrically grounded in accordance with local codes or in the
absence of local codes with the National Electrical Code ANSI/NFPA 70, or the Canadian Electrical Code, CSA
C22.2, as applicable.
•
A manual gas shut-off valve must be installed in the gas supply line ahead of the appliance and gas pressure
regulator for safety and ease in servicing.
•
The gas pressure regulator supplied must be installed on the appliance prior to connecting the equipment to
the gas line. Failure to install a regulator could be potentially hazardous and will void the appliance warranty.
•
The appliance and its individual shut off valve must be disconnected from the gas supply piping system
during any pressure testing of that system at test pressures in excess of ½ psi (3.45kpa).
•
The appliance must be isolated from gas supply piping system, by closing its individual manual shut off
valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi
(3.45kpa).
www.CookingPerformanceGroup.com
1-800-678-5517
3