Billion BiPAC 7800(N)X(L) Manuel de configuration - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Billion BiPAC 7800(N)X(L). Billion BiPAC 7800(N)X(L) 10 pages. 3g/4g lte (wireless-n) (vpn) adsl2+/ fibre broadband router
Également pour Billion BiPAC 7800(N)X(L) : Manuel de démarrage rapide (10 pages), Manuel de configuration (11 pages)
Imprimer la page
2. Connect a second network cable to one of the remaining three yellow ports
located at the back of the modem. The other end will connect directly to your
computer.
3. Finally, connect the power cable to your modem and plug the power adapter
in to your power point. Press the power button to the "ON" state
The diagram on the previous page
how the modem connects physically to your phone line, computer, and power
point.
4. Now that the modem is connected to your computer, the ONT, and is
powered on, you will need to ensure that the lights on the modem indicate the
following:
Power
EWAN
Ethernet (1-4)
A network icon will appear in your task bar, and you are now ready to setup
your Internet connection
Note: If you have already connected via Wi-Fi you will see the below icon
instead.
(Figure: Billion BiPAC 7800NXL)
On
On
On or Blinking
shows