CPI R900 Manuel d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} CPI R900. CPI R900 7 pages.

regular maintenance

The R900 bill validator will not need to be cleaned as often as magnetic sensing bill acceptors.

However, if it becomes too dirty, that will effect to product performance such as bill acceptance rate, etc.

To maintain the bill validator with the best performance, we recommend to do regular maintenance once every 3-6 months.

If cleaning is required, use a soft cloth moisture with mild non-abrasive detergent.

Cleaning Mode

Use proper cleaning sheet CPI supported. (Contact local ASC)

 To enter the "Cleaning Mode", press the push switch twice

 The bezel lam starts flashing. It means the product is in "Cleaning Mode"

To cancel the "Cleaning Mode", press push switch once or leave it for 30 seconds

 Insert the cleaning sheet into the bill insertion slot.

The sheet is pulled inside to start the cleaning operation.

The sheet moves back and force 3 times to complete bill path and sensor cleaning.

 Upon the completion of cleaning, the cleaning sheet is returned to the bill insertion slot.

To enter the "Cleaning Mode"

Phase2 - R900 Installation Guide (V1.1 2020-04-16).docx

Press push switch twice

keeps Flashing

Insert cleaning sheet

into bill insertion slot

If the BV is in "Cleaning Mode",

the bezel lamp starts flashing

Bezel Lamp

Once completed cleaning for

bill path and validation sensors,

automatically returned to

Use proper cleaning

sheet CPI supported

Bezel Lamp

starts Flashing

Bezel Lamp

keeps Flashing

the cleaning sheet is

insertion slot