Avsl 172.113UK Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avsl 172.113UK. Avsl 172.113UK 3 pages. 1u stereo power amplifiers

Setup
Connect the supplied power lead to the rear IEC inlet of the PL-series amplifier (11) and plug the other end into
a mains power socket, ensuring the correct voltage at the outlet.
Ensure that the cooling vents at front and rear (10) are not covered or obstructed in any way with adequate
space for air-flow through the unit.
Operation
With CH A and CH B volume controls (3, 5) turned fully down (anti-clockwise), switch on the power (1) and the
LED POWER indicator will light (4)
Playing the input signal into CH A and CH B inputs (6, 7), gradually increase the CH A and CH B volume
controls. The amplified signal should be heard through the speakers and the SIG indicators (4) should respond
to the audio output. Increase the volume controls to the required level.
Alongside the SIG indicators are CLIP indicators, which should only light very briefly on the loudest transients or
spikes in the audio. If the CLIP LEDs light for more than a fraction of a second at a time, the volume controls
should be turned down or input signal will need to be reduced.
Before powering down, turn down the volume controls to avoid loud pops or noises through the speaker
Specifications
Power supply
Fuse
Power RMS @ 8Ω
Power RMS @ 4Ω
Input connections
Output connections
Frequency response
THD +N
Damping factor
S/N ratio (A weighted) : line
Slew rate
Input impedance
Output circuit architecture
Protection
Indicators
Controls
Dimensions
Weight
Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
PL1400
230Vac, 50Hz (IEC)
T10AL (250V)
2 x 380W
2 x 700W
Combo jack/XLR balanced (L+R)
SPK (L+R) + 4mm binding posts (L+R)
20Hz - 20kHz (±0.5dB)
<0.05%
300
100dB
20V/us
10k Ohms unbalanced, 20k Ohms balanced
Class D
Temperature, short circuit, DC, overload
Power, signal, clip
L+R level, power on/off
482 x 180 x 44mm
3.2kg
PL2000
T15AL (250V)
2 x 540W
2 x 1000W
4.0kg
Errors and omissions excepted.
Copyright© 2019. AVSL Group Ltd.
PL 1400, PL2000 User Manual