DG FPGA Mise en place - Page 7

Parcourez en ligne ou téléchargez le pdf Mise en place pour {nom_de_la_catégorie} DG FPGA. DG FPGA 14 pages.
Également pour DG FPGA : Mise en place (5 pages), Mise en place (20 pages), Mise en place (8 pages), Mise en place (10 pages), Mise en place (18 pages)

Imprimer la page
DG FPGA Mise en place
dg_nvmeip_raid0x2_fpgasetup_xilinx_en.doc
b) For Quad M.2 card, please follow below steps.
i.
Insert two M.2 NVMe SSDs to M2_1 and M2_2 connectors on Hyper Quad M.2
card, as shown in Figure 2-2.
Figure 2-2 Two M.2 Gen4 NVMe SSDs on Hyper Quad M.2 Card
ii.
Confirm that two mini jumpers are inserted at J5 connector on AB18. After that,
connect FPGA Side (A-side) on AB18 to PCIe connector on FPGA board and
connect Hyper Quad M.2 NVMe SSD Card to device side (B-Side) on AB18, as
shown in Figure 2-3.
Warning: Please confirm that the Hyper Quad M.2 Card is inserted in the
correct side of AB18 (B-side, not A-side) before power on system.
iii.
Connect ATX power supply to AB18-PCIeX16 board.
Figure 2-3 AB18, Quad M.2 Card, and FPGA board connection
15-Jul-21
Page 7