Avsl 953.213UK Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avsl 953.213UK. Avsl 953.213UK 9 pages. Rackmount 100v mixer-amplifiers with bluetooth

Imprimer la page

Specifications

Power supply

Output power: RMS

Outputs : Speaker

Output: Line

Inputs

Volume controls

Equalizer : Bass / Treble

Bluetooth version

Phantom power

THD

Dimensions

Weight

Troubleshooting

No power LED on control panel

Power LED is on but no other LEDs

and no output

Power light and output LEDs

lighting but no output

Bluetooth cannot connect

No audio from Bluetooth device

Output too loud or distorted

Output too quiet or inaudible

No microphone output

Feedback from microphone

Amplifier overheating

Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines.

RM60

RM120

110/230Vac, 50/60Hz (IEC) or 24Vdc option (screw terminals)

60Wrms

120Wrms

100V / 4 - 16Ω / COM

RCA signal output

Mic XLR, 2 x mic/line jack, 2 x RCA line, 24V mute contacts, RF antenna

Mic1, mic/line2+3, line4+5 (USB), master

100Hz ±10dB / 10kHz ±10dB

2.0

+20V (MIC 1 input)

<1.0%

433 x 320 x 89mm

5.98kg

8.36kg

Ensure IEC lead is in good condition and connected properly

Ensure POWER switch is on and check mains inlet fuse

Check input signals and condition of input connection leads

Check MASTER, MIC, LINE or USB/SD volume controls are turned up

Check speaker output terminals are connected correctly

Check speakers are working (test on another amp if available)

Check memory device is connected properly (remove and re-insert)

Check file types – standard mp3 digital audio files required

Check memory device works on a PC or Mac for standard playback

Ensure that Bluetooth is enabled on sending device

Ensure that the sending device is within Bluetooth range (5-10m)

Check that "adastra ****" is the connected device

If there are more than one "adastra ****" devices, check each in turn

If one of many "adastra ****" devices, edit the Bluetooth ID

Ensure that volume controls are not turned down on sending device

Check volume and Play/Pause buttons in case Bluetooth is muted

Reduce MIC, LINE IN, USB/SD and/or MASTER level

Ensure Hi-Z line level input(s) not connected via MIC input

Increase MIC, LINE IN, USB/SD and/or MASTER level

Check for quiet recording of media files on USB

Check VOX override is not unintentionally suppressing audio playback

Check phantom power is enabled if using a condenser microphone

Face microphone away from speakers and monitors and reduce level

Ensure cooling vents are clear from debris and dust

Check that 4, 8 or 16Ω speakers are not connected to 100V terminals

Ensure total 100V speaker wattage is lower than amplifier rating

Ensure that 100V and 4, 8 or 16Ω speakers are not both connected

Ensure that total load connected to 4 - 16Ω output is not less than 4Ω

RM240S

RM360S

240Wrms

360Wrms

4x100V / 4 - 16Ω / COM

433x410x89mm

9.62kg

12.68kg

Errors and omissions excepted.

RM Series User Manual