Avsl 170.665UK Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avsl 170.665UK. Avsl 170.665UK 12 pages. Digital speaker management system
Également pour Avsl 170.665UK : Manuel de l'utilisateur (12 pages)
Imprimer la page
The software will normally be able to detect the correct COM port and this will be displayed.
Click OK to confirm the USB connection between PC and DSM26. If unsuccessful, try a different COM port from the list.
If COM port is not detected automatically, open the PC's Hardware Device Manager.
(e.g. "Start-Settings-Control Panel-System-Hardware-Device Manager" or type "Device Manager" into the search box)
Look in "Ports" to identify which port is being used for the DSM26.
Select the correct port for the connected DSM26 in the Connection menu (COM4 is shown in the above example)
If connecting via LAN, enter a workable IP address which is not occupied by other equipment into the "Network" field.
Program menu
Clicking on the Program button at the top of the main screen will open the following window.
Channel setup
Clicking the Ch Setup button will open the widow shown opposite.
Click in each window and type a name for each input and output,
then hit return to rename that channel
Copy function
Clicking the Copy button in the main screen will open the
widow shown opposite.
Select inputs (left side) or outputs (right side) to copy from
and to and click OK to copy all settings across.
System menu
Clicking the System button in the main screen will open
the widow shown opposite.
A
Select LCD backlight constant or off after 25s
B
Select cutoff temperature for the device
C
Interface information is shown in the 4 fields on
the right side of the window and can be edited
by typing directly in each and clicking Update
9
A
Load/Delete group user data or effect data from device
B
Save/Delete group user data or effect data from device
C
Load group user data or effect data from PC
D
Load all group user data or effect data from PC
E
Save group user data or effect data from PC
F
Save all group user data or effect data from PC
To load a program, check button A, click on the program in the list in
the top half of the window and then click the Load button.
To delete a program, click on it in the list in the top half of the
window and then click the Delete button.
To save a program after editing, check button B, select a blank
program or one for over-writing, type a name in the text field and
click the Save button.
Selected programs or All programs may be saved to PC or loaded
from PC by checking buttons C, D, E or F and clicking "OK"
170.665UK User Manual