CPR AquaFuge 2 Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} CPR AquaFuge 2. CPR AquaFuge 2 2 pages. Hang-on refugium

Imprimer la page

Although it is difficult to classify the AquaFuge

depend on how you set it up. The AquaFuge

improving water quality, decreasing nuisance algae and providing greater stability for your

aquarium.

There are a number of ways to set up and use your AquaFuge

possibilities:

1. With or without a live sand bed. A live sand bed can assist with denitrification and provides a

substrate for detritivores and other organisms. This is very beneficial to tanks that may lack live

sand.

2. Small pieces of live rock and/or rubble can provide a substrate for small corals, mushrooms, and

algae to grow on. Branch rock works especially well.

3. The addition of a full spectrum light to the AquaFuge

conditions for photosynthetic invertebrates and various species of algae. The AquaFuge

been specifically designed to accept some of the smaller size LED lighting on top of the

refugium. Caulerpa and other decorative algae may be grown out of the reach of herbivorous

fish. By having an area where algae can thrive, the competition for nutrients can help to

reduce the growth of nuisance algae in the main tank.

4. The AquaFuge

2 now makes coral propagation for reef tank owners easier. Small fragments

can be placed into the relative safety of the AquaFuge

strong water movement. Here they will have a place to heal from the cutting and can attach

to whatever substrate you offer them. The AquaFuge

mushroom anemones and polyps to attach before being placed back into the main aquarium.

Support pin

Outlet

Adjustment

Screws

CPR Technical Support (707) 267-6024 • M - F 9:00am—5:00pm PST

Setup Recommendations

2 as a traditional "filter", its benefits to your tank

2 has the potential of increasing biodiversity,

Pump Maintenance & Cleaning

To ensure reliable and efficient operation of the Tunze powerhead

included with your AquaFuge

and cleaning your pump at least every 4 to 6 months.

Powerhead Disassembly

1. Unplug and remove powerhead from your AquaFuge

2. Remove impeller cover. Please note position of adjustment

notch above the "+ / -" on cover before removal.

3. Remove impeller assembly.

4. Remove rectangular cover with "TUNZE" logo below power

cord at back of powerhead.

Powerhead Cleaning

1. Disassemble powerhead

2. Place powerhead body and components in vinegar or dilute

muriatic acid. (1 gallon of water to 0.75 to 1 cup of acid)

3. Soak for 15 to 20 minutes. Longer is ok if there is a lot of calcium

deposits on the powerhead.

4. Use a small brush to gently any remaining deposits.

5. Rinse powerhead body and components in freshwater and re-

assemble using the reverse order of the instructions above.

* Make sure the adjustment notch above "+ / -" on the impeller

cover lines up with the fin on the powerhead body.

www.cprusa.com • [email protected]

2 refugium. Here are just a few

2 can provide excellent growing

2, away from inquisitive animals and

2 is also an ideal area for loose

2 we recommend disassembling

2 has