Avsl Starwash Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Avsl Starwash. Avsl Starwash 6 pages. Multicolour wash effects with green & red star cluster laser

Imprimer la page

Laser safety warnings...

Potential laser injury hazard exists with this product! Please read these instructions carefully, which include important information

about installation, safe use and service!

Caution Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser radiation.

Caution It is illegal and dangerous to shine any laser at aircraft.

Caution Operating procedures other than those specified herein may result in hazardous radiation exposure.

Overhead rigging

Important - the installation must be carried out by qualified service personal only. Improper installation can result in serious injuries

and /or damage to property. Overhead rigging required extensive experience. Working load limits should be respected, certified

installation materials should be used, the installed unit should be inspected regularly for safety.

Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.

Locate the unit in a well ventilated spot, far away from any flammable materials and/or liquids. The fixture must be fixed at least

50cm from surrounding walls

The device should be installed out of reach of people and outside of areas where persons may walk by or be seated.

Before rigging make sure that the installation area can hold minimum point load of 10 times the device`s weight.

The device should be well fixed; a free swinging mounting is dangerous.

Do not cover any ventilation opening as this may result in overheating

Before first time use, the unit should be inspected for safety. Inspection the unit regularly every year.

AC power

The unit is supplied with a power plug appropriate to its voltage. Should any other connections be required they must be carried out

with the following configuration:

Cable (EU)

Brown

Light blue

Yellow/green

DMX-512 connection

If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the DMX input of the first unit

in a DMX chain. If you wish to connect a DMX controller with other XLR outputs you will need to use adapter cables.

DMX output

Connect the DMX output of the first unit in a DMX chain with the DMX input of the next unit in the chain. Always connect the the

output of one unit with the input of the next unit until all units are connected.

Cable (US)

Black

White

Neutral

Green

1 = Shield

2 = Signal (-)

3 = Signal (+)

International

Live

Earth

DMX input