CPR CPR-105 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CPR CPR-105. CPR CPR-105 12 pages. Cpr global cpr-105 all-in-one call blocker

Imprimer la page
S E T T I N G U P
C P R C A L L B L O C K E R
Step 1
Step 1
Remove the line cable from your telephone and plug into the LINE 1 port of the Call
Remove the line cable from your telephone and plug into the LINE 1 port of the Call
Blocker.
Blocker.
Step 2
Step 2
Use the small Black cable provided to connect the TEL 1 port to your telephone
Use the small Black cable provided to connect the TEL 1 port to your telephone
Step 3
Step 3
Insure all cables are connected securely
Insure all cables are connected securely
The Call Blocker is setup correctly when there is a red light displayed on the top of the
The Call Blocker is setup correctly when there is a red light displayed on the top of the
unit, this is shown when the phone is off the receiver or when on a call. If you are using
unit, this is shown when the phone is off the receiver or when on a call. If you are using
a cordless phone then press the Call Button for a dial tone.
a cordless phone then press the Call Button for a dial tone.
If you have no dial tone or no red light you will need to disconnect the cables then
If you have no dial tone or no red light you will need to disconnect the cables then
reconnect using the LINE 2 and TEL 2 ports.
reconnect using the LINE 2 and TEL 2 ports.
Disconnect line cable from
your telephone and plug into
02.
the LINE 1 port of the
Call Blocker
2