CPRO NBT5-45-R Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CPRO NBT5-45-R. CPRO NBT5-45-R 13 pages. 5m hd ip fixed bullet camera
Imprimer la page
Installation -
Installation
Before installing your camera, you have to read the following cautions.
1. You have to check whether the location can bear five times of the weight of your camera.
2. Don't let the cable to be caught in improper place or the electric line cover to be damaged.
Otherwise it may cause a breakdown or fire.
3. When installing your camera, don't allow any person to approach the installation site. If you have any valuable things under the
place, move them away.
Reset Button
T-W Jog Button
Test Video Output
Reset to the Factory Default
Press the reset button for 5 seconds to return the setup
to the factory default.
Warning :
If you press the 'Reset' button, you will lose all setting
data. If needed, please, make a note for further installation.
Using the Template sheet, make the cabling hole on the
1
wall/ceiling.
Connect the network cable, power cable respectively.
2
See the section 'Installation - Cabling' for details.
Fix the camera on the wall/ceiling by screw provided.
3
SD Card Slot
Loosen the Pan/Tilt stoper screw a litte before fixing the
camera.
By using the test video cable, check the screen during
4
installation. You can adjust the zoom ratio using the T-W
jog button.
9
WIDE
Zoom Out
Zoom In
TELE