Allied Telesis AR410 Manuel d'installation rapide - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Allied Telesis AR410. Allied Telesis AR410 8 pages. Ar400 series
Également pour Allied Telesis AR410 : Manuel d'installation rapide (12 pages)
Imprimer la page
Quick Install Guide
C613-04032-01 REV C
LEDs and What They Mean
LEDs indicate the router's operational status and port activity. Descriptions of
PIC LEDs can be found in the PIC Quick Install Guide and the PIC Hardware
Reference.
AR410 System LEDs
LED
State
Power
Green
System
Amber
Off
Enabled
Green
(PIC Bay 0)
Off
Full Dup
Green
Off
Link/ACT
Green
Flashing
Off
100M
Green
Off
Troubleshooting Installation
If you have problems installing the router, try one or more of the following:
No LEDs Light
The most likely reason is that the router is not receiving power. Check the
following:
1.
Check that the supply outlet's switch is in the ON position.
2.
Test the mains power outlet to verify that it is working.
If the problem persists, please contact your authorised Allied Telesyn
distributor or reseller.
Function
The router is receiving power and the power
switch is in the ON position
The router is malfunctioning
Normal operation
A PIC card is correctly installed and has been
detected by the router
No PIC is installed
The corresponding port is operating at full-
duplex
The corresponding port is operating at half-
duplex
A link has been established through the
corresponding port
Data is being transmitted through the
corresponding port
No link is present through the corresponding
port
The corresponding port is operating at
100Mbps
The corresponding port is operating at 10Mbps
7