Allied Telesis AT-8948 Comment configurer - Page 5

Parcourez en ligne ou téléchargez le pdf Comment configurer pour {nom_de_la_catégorie} Allied Telesis AT-8948. Allied Telesis AT-8948 9 pages. At-8900 series
Également pour Allied Telesis AT-8948 : Fiche technique (4 pages), Fiche technique (3 pages), Fiche technique (3 pages), Fiche technique (2 pages), Fiche technique (5 pages), Vue d'ensemble (1 pages), Brochure (8 pages), Manuel complémentaire (6 pages), Manuel d'installation rapide (13 pages)

7. Give the VLANs IP addresses

8. Configure VRRP

Turning on adoptvrip means that the master adopts the VRRP IP address. This means you

can use the VRRP IP address to ping the current master, or to connect to it through telnet,

SSH, HTTP, SSL or SNMP. Also, DNS relay continues functioning via the same IP address at all

times.

Page 5 | AlliedWare™ OS How To Note: VRRP

enable ip

add ip int=vlan1 ip=192.168.1.1

add ip int=vlan2 ip=192.168.2.1

add ip int=vlan3 ip=192.168.3.1

...

enable vrrp

create vrrp=1 over=vlan1 ipaddress=192.168.1.3 priority=150

adoptvrip=on

create vrrp=2 over=vlan2 ipaddress=192.168.2.3 priority=150

adoptvrip=on

create vrrp=3 over=vlan3 ipaddress=192.168.3.3 priority=150

adoptvrip=on

...

Core 1 (master) configuration