Avtec Scout NENA Manuel de configuration - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Avtec Scout NENA. Avtec Scout NENA 15 pages. Deskset for hardware media workstation
Imprimer la page- 1. Table of Contents
- 2. NENA Radio/Telephone Headset Interface
- 3. Installing the Jack Box
- 4. Software Configuration
- 4. Configuring an 1101 Jack Box
- 4. Configuring a 12Xx/50Xx Jack Box
- 4. Configuring the External Audio Interface
- 4. Configuring the Endpoint for the E911 Deskset
- 4. Creating a Line Pad for an E911 Deskset Endpoint
- 5. Using an E911 Deskset
- 6. Appendix A: What Does It Mean to be NENA-Compliant
- 7. Appendix B: Understanding the Physical Connections
17. Under the Audio Routing section, in fields SELECT through UNSELECT10, select the channels where the jack box
receives audio.
For more information, see "Configuring Audio Routing" in the Scout Manager Online Help.
18. In the External IRR Playback field, select YES or NO to indicate if the jack box should receive audio from
external instant recall recorders when in playback mode. Default: NO.
19. In the Ringtones field, select OFF, PRIMARY, or SECONDARY to indicate if this jack box is the primary or
secondary location for ringtones or if no ringtones should occur. Default: OFF.
20. If Ringtones is set to PRIMARY or SECONDARY, in the Ringtones Attenuation (dB) field, enter a value to indicate
the number of decibels to lower the ringtone audio. Range: 0 to 71. Default: 10.
21. In the Other AP Type I Microphones field, select YES or NO to indicate if this jack box should receive transmit
audio from other Type I microphones. Default: NO.
22. If Other AP Type I Microphones is set to YES, in the Other Microphone Attenuation (dB) field, enter a value to
indicate the number of decibels to lower the microphone's audio. Range: 0 to 71. Default: 10.
23. Click Add or Update to save your configuration settings.
Configuring a 12xx/50xx Jack Box
Perform the following steps to add and configure a 12xx series or 50xx series jack box using Scout Manager:
1. Access Scout Manager > Console Configuration webpage > Audio Devices tab.
2. In the New Device dropdown, select 12xx/50xx Jack Box.
3. Click Add.
The 12xx/50xx Jack Box configuration page displays.
4. In the Jack Box Name field, enter a name for the jack box. The name is used to identify this jack box from other
audio devices configured on this console.
5. Under the AP Port Settings section, from the AP Port dropdown, assign a port where this jack box connects to
the back of the media workstation.
For more information, see "Assigning an AP Port or Network Connection to a Console" in the Scout Manager
Online Help.
6. In the Input Gain (dB) field, enter the amount of gain that Scout should add to the audio coming from the jack
box to the media workstation. Range: –30 to 30 dBm. Default: 3.
NOTE
Scout adjusts transmit audio coming into the media workstation from the jack box by the Input Gain (dB)
value. This setting raises the volume of the dispatcher's audio to the field. Use this setting in conjunction
NENA/Deskset for Hardware Media Workstation | November 2020 | Revision 8
Phone: 1-803.358.3600 • Fax: 1-803.358.3636
100 Innovation Place • Lexington SC 29072 USA
avtecinc.com • [email protected]
4