Allied Telesis Routers and Switches Fiche technique - Page 6
Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} Allied Telesis Routers and Switches. Allied Telesis Routers and Switches 15 pages. Allied telesis router and switch data sheet
Imprimer la page
9. Configure triggers
If one of the load balancers goes down, the firewall configuration needs to change. This
example uses triggers to make this change automatically, by running a script when the state
changes. See
Enable triggers.
Set the router to run the script
script adds firewall allow rules to support the resource pools.
Set the router to run the script
removes redundant firewall allow rules.
10. Save the configuration
Save the configuration and set the router to use it when it restarts.
Configure Load Balancer Redundancy on Allied Telesis Routers and Switches
"Create the Scripts" on page 9
enable trigger
create trigger=2 module=loadbalancer event=master
script=master.scp
create trigger=3 module=loadbalancer event=slave script=slave.scp
create config=lb_redun.cfg
set config=lb_redun.cfg
for instructions for making the scripts.
if it becomes the master load balancer. This
master.scp
if it becomes the slave load balancer. This script
slave.scp
6