Avtech DG206A Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avtech DG206A. Avtech DG206A 6 pages. Ir dome camera

Imprimer la page

When the camera menu is entered, you'll see the keys on the bottom right corner to

move between and change those configurations.



Move between selections or change settings.



Enter the currently-selected item.

Quit the camera parameters mode.

DAY / NIGHT

MODE

D TO N

N TO D

DELAY TIME

AWB

MODE

R-G GAIN

B-G GAIN

MODE

BRIGHT

SHUTTER

FLICKER

BLC

AGC

LSC

SPECIAL

PRIVACY

MOTION

HLC

EFFECT

COLOR GAIN

COLOR HUE

SHARPNESS

CONTRAST

BRIGHT OFF.

MIRROR

FLIP

EXT / COLOR / B&W / AUTO

1 ~ 63

1 ~ 60

AUTO / USER / (PUSH) / 8000K

/ 6000K / 4200K / 3200K

1 ~ 255

ESC / HOLD / DC

0 ~ 255

AUTO / 1/25 / 1/30 / 1/50 / 1/60 /

1/100 / 1/ 120 / 1/250 / 1/500 /

1/1000 / 1/3000 / 1/10000

OFF / 50HZ / 60HZ

0 ~ 16

1 ~ 5

ON / OFF

AREA SEL. / MASK PAT. / SX /

EX / SY / EY

MOTION / SENSITI. / ALARM /

HOLD TIME

HLC / MASK VALUE /

THRESHOLD

0 ~ 255

0 ~ 71

0 ~ 255

-128 ~ 127

OFF / ON

DESCRIPTION

Set the day & night mode among EXT, COLOR, B

& W, and AUTO.

Set the sensitivity for the day & night mode from

day to night.

Set the sensitivity for the day & night mode from

night to day.

Set the delay time after which the day and night

switch is made.

Set the white balance mode among AUTO, USER,

(PUSH), 8000K, 6000K, 4200K, 3200K, and

HOLD.

Adjust the ratio between red and green.

Adjust the ratio between blue and green.

Set the exposure mode among ESC, HOLD, and

DC.

Set the level of brightness to adjust the brightness

of the image.

Set the shutter speed for exposure.

Enable this function to enhance the flicker

situation.

Set the level of Back Light Compensation to adjust

the image to compensate for an area that is

overpowered by brightness because of excessive

light.

Set the level of Auto Gain Control to automatically

adjust the image when the light level changes.

Enable or disable Lens Shading Correction to

correct the phenomenon of vignetting when the

focal length is short.

Set to cover certain areas on the camera image.

Set certain areas for motion detection.

Set to suppress strong backlight for clearer

images.

Set the level of gain.

Set the level of hue.

Set the level of sharpness to enhance the clarity of

image detail by adjusting the aperture and

sharpening the edges.

Set the level of contrast.

Set the level to compensate the brightness of the

image.

Enable to rotate the images horizontally based on

your installation situation when necessary.

Enable to rotate the image 180° when necessary.