Avtech DGC5446SE Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avtech DGC5446SE. Avtech DGC5446SE 7 pages. 5mp ir dome camera

Imprimer la page

CONNECTION

1. DC12V Input Terminal

Connect the power terminal of the camera to a DC 12V regulated power supply.

Note:

Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power tolerance of

this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this unit.

2. Video Output Connector (VIDEO OUT)

Connect the camera video output to the video input of a DVR with 75Ω coaxial cable.

Note:

To ensure the camera has sufficient protection against moisture, an extra waterproof measure, such

as by using an insulating tape, must be used to cover the power and video connectors after

connection.

FOCAL LENGTH & FOCUS ADJUSTMENT

This function is available for Model 2 only.

Note: The access path is taking our HD CCTV recorder as an example. If you're using other brand's recorder,

please refer to its own user manual to know how to access the camera parameters.

Based on the recorder type you have, on the live view:

Type 1

Click twice on the channel that this camera is connected to show in full screen, and click on

right side to display the PTZ control panel.

Type 2

Click twice on the channel that this camera is connected to show in full screen, and click on

bottom left of the channel to show the PTZ control panel.

How to adjust

＋

－

Zoom in / out max

Zoom in / out

Focus near / far

Click to zoom in on the image to the largest / zoom out on the image to its

original size.

Click to zoom in / out the image.

Click to adjust the focus of the image.

on the