Dell 5330 Manuel de réimagerie - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de réimagerie pour {nom_de_la_catégorie} Dell 5330. Dell 5330 18 pages. Loading paper and specialty media
Également pour Dell 5330 : Manuel de référence rapide (2 pages)

Imprimer la page

CAUTION:

This re-imaging guide is designed for system administrators. Do not attempt to re-image the system

if you are not an administrator or are unsure of the procedures. Failure to follow instructions may result in

permanent data loss.

NOTE:

Information that is provided in this guide is only applicable to computers shipped with Windows 10 or Window 11

operating system.

Re-imaging is the process of removing all software on the computer and reinstalling the removed software. Re-imaging is

required when software in the computer is corrupted or damaged and it can also be used as a means of removing harmful and

malicious software in your computer. This re-imaging guide provides the steps that are required for re-imaging your computer.

This guide assists you in installing Dell-recommended software stack and settings, drivers, and applications, which are tested

and validated on your computer. The installation of the listed drivers and applications as described in the guide enhances the

optimal performance of your computer.

Dell also provides drivers and applications that are not included with the Windows operating system. These drivers are required

to enable the following solid-state drives (SSDs):

● 128 GB SSD

● 256 GB PCIe SSD

● 512 GB PCIe SSD

● 1024 GB PCIe SSD

● 2048 GB PCIe SSD and larger capacity size PCIe SSDs

It is always recommended to re-image on a newly installed operating system and not from any previous image-build. Ensure

BIOS settings, including SATA configurations and modes, are appropriately set and the latest drivers and applications are used

when re-imaging the computer.

Introduction