Dell 5530 Mono Laser Manuel de référence rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Dell 5530 Mono Laser. Dell 5530 Mono Laser 2 pages. Loading paper and specialty media
Également pour Dell 5530 Mono Laser : Manuel d'entretien (46 pages), Manuel d'installation et de spécifications (29 pages), Configuration et spécifications (29 pages)

Clearing jams

Push the release latch, and then lower the multipurpose feeder

door.

Push the release latch, and then open the front cover.

Lift and pull the print cartridge out of the printer.

Warning—Potential Damage: Do not touch the

photoconductor drum on the underside of the cartridge. Use

the cartridge handle whenever you are holding the cartridge.

Place the print cartridge aside on a flat, smooth surface.

Warning—Potential Damage: Do not leave the cartridge

exposed to light for extended periods.

Warning—Potential Damage: The jammed paper may be

covered with unfused toner which can stain garments and

skin.

Remove the jammed paper.

CAUTION—HOT SURFACE: The inside of the printer

might be hot. To reduce the risk of injury from a hot

component, allow the surface to cool before touching.

Note: If the paper is not easy to remove, then open the rear

door and remove the paper from there.

Align and reinstall the print cartridge.

Close the front cover.

Close the multipurpose feeder door.

Press

If the paper is exiting the printer, then pull the paper out, and then

press

If the paper is not exiting the printer:

Pull down the top rear door.

Slowly remove the jammed paper to avoid tearing it.

Close the top rear door.

Press

241–245 paper jams

Pull out the tray indicated on the display.

Remove any jammed paper, and then insert the tray.

Press

If the jam message persists for a 250- or 550-sheet tray, then

remove the tray from the printer.

Remove the jammed paper, and then insert the tray.

Press