Dell Inspiron 1010 Manuel d'entretien - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 1010. Dell Inspiron 1010 45 pages. Service manual
Également pour Dell Inspiron 1010 : Manuel de démarrage rapide (26 pages)

Imprimer la page

securing clips

10. Lift the 2-in-1 memory and processor board out of its system board connector.

Replacing the 2-in-1 Memory and Processor Board

1. Align the notch in the 2-in-1 memory and processor edge connector with the tab in the connector slot.

2. Slide the 2-in-1 memory and processor board firmly into the slot at a 45- degree angle, and gently press the 2-in-1 memory and processor board down

until it clicks into place. If you do not hear the click, remove the board and reinstall it.

3. Replace the processor system board cover on the 2-in-1 memory and processor board.

4. Replace the four screws that secure the processor system board cover and the 2-in-1 memory and processor board to the system board.

5. Replace the palm rest bracket (see

6. Replace the hard drive (see

7. Replace the palm rest (see

8. Replace the keyboard (see

9. Replace the battery (see

Replacing the

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

10. Update the BIOS (see

Flashing the

Back to Contents Page

Replacing the Palm Rest

Bracket).

Replacing the Hard

Drive).

Replacing the Palm

Rest).

Replacing the

Keyboard).

Battery).

BIOS).