Dell Inspiron 1090 Manuel d'entretien - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 1090. Dell Inspiron 1090 47 pages.
Également pour Dell Inspiron 1090 : Manuel d'entretien (47 pages)
Imprimer la page
Back to Contents Page
AC-Adapter Connector
Dell™ Inspiron™ 1090 Service Manual
Removing the AC-Adapter Connector
Replacing the AC-Adapter Connector
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the AC-Adapter Connector
1. Follow the instructions in
Before You
2. Remove the label door (see
3. Remove the keyboard (see
4. Remove the palm-rest assembly (see
5. Remove the battery (see
Removing the
6. Remove the memory module (see
7. Disconnect the AC-adapter connector cable from the connector on the system board.
8. Make note of the AC-adapter connector cable routing and remove the cable from the routing guide.
9. Lift the AC-adapter connector off the system board.
1
AC-adapter connector
2
Replacing the AC-Adapter Connector
1. Follow the instructions in
Before You
2. Place the AC-adapter connector on the computer base.
3. Route the AC-adapter connector cable through the routing guide.
4. Connect the AC-adapter connector cable to the connector on the system board.
Begin.
Removing the Label
Door).
Removing the
Keyboard).
Removing the Palm-Rest
Battery).
Removing the Memory
Module).
AC-adapter connector cable
Begin.
Removing the
Assembly).
Battery) before working inside the