Allied Telesis AT-IMC100T/SCMM Manuel d'installation - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Allied Telesis AT-IMC100T/SCMM. Allied Telesis AT-IMC100T/SCMM 20 pages. Fast ethernet industrial media converter
Imprimer la page
Mounting Installation
Wall-Mount Plate Fixing
3.1.5 Check the DIN-Rail clip is tightly fixed on the DIN rail.
3.1.6 To remove the industrial switch from the track, reverse the steps above.
3.2 Wall-Mount Plate Fixing
Follow the steps below to mount the industrial switch with the wall mount plates included.
To remove the DIN-Rail clip from the industrial switch, unscrew the screws to remove the DIN-Rail clip.
Note:
3.2.1 Place the wall-mount plates on the rear panel of the industrial switch.
3.2.2 Use the screws to secure the wall-mount plates on the industrial switch.
3.2.3 Use the hook holes at the corners of the wall-mount plates to hang the industrial switch on the wall.
3.2.4 To remove the wall-mount plates, reverse the steps above.
Wall-Mount Plate Fixing
FIGURE 3-4
AT-IMC100T/SCSM and AT-IMC100T/SCMM Fast Ethernet Industrial Media Converters
16