Dell Inspiron 1320 Manuel d'entretien - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 1320. Dell Inspiron 1320 46 pages. Dell inspiron inspiron 13: specifications
Également pour Dell Inspiron 1320 : Manuel d'installation et de fonctionnalités (12 pages), Fiche de données de sécurité (6 pages)

Dell Inspiron 1320 Manuel d'entretien
Back to Contents Page
  Camera Board
Dell™ Inspiron™ 1320 Service Manual 
  Removing the Camera Board
  Replacing the Camera Board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
 Removing the Camera Board
 
1. Follow the instructions in
Before You
 
2. Remove the battery (see
Removing the
 
3. Remove the center control cover (see
 
4. Remove the keyboard (see
 
5. Remove the hard drive (see
 
6. Remove the palm rest (see
 
7. Remove the display assembly (see
 
8. Remove the display bezel (see
 
9. Disconnect the camera cable from the connector on the camera board.
 
10. Remove the screw that secures the camera board to the display cover.
1
camera board
3
camera cable connector
 
11. Remove the camera board off the display cover.
 Replacing the Camera Board
 
1. Align the camera board over the screw hole.
Begin.
Battery).
Removing the Center Control
Removing the
Keyboard).
Removing the Hard
Drive).
Removing the Palm
Rest).
Removing the Display
Assembly).
Removing the Display
Bezel).
2
Removing the
Cover).
screw
Battery) before working inside the