Avtech AVD717ZD Manuel de démarrage rapide - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Avtech AVD717ZD. Avtech AVD717ZD 16 pages. High-end series
Imprimer la page
Install the supplied AP software on your NB/PC. Then, log into the DVR with the supplied AP software for the following
default DVR settings.
‧ The DVR default IP address: 192.168.1.10
‧ The DVR default account / password: admin
‧ The DVR default port: 80
2) Set DVR network setting in "SYSTEM CONFIG" → "Network" of the supplied AP:
In "SYSTEM CONFIG" → "Network" of the supplied AP, select the "Static IP" in "IP TYPE" section. And then type the
"Server IP", "Gateway", "Net Mask" and "Web Port" (1~9999) information obtained from your ISP. Press "APPLY" button
to confirm the setting.
3) Login your DVR via an Ethernet or dial-up network:
After setting up the network information of the DVR and connect it to the network, you can use the IP address / Port /
Account / Password you just entered in the supplied AP software to log into your DVR remotely.
Note: Before changing the network properties of your PC/NB, please write down the original network
properties in case you need to recover the properties later.
3.6.2 DDNS Apply
You need to apply a DDNS account before setting PPPoE or DHCP connection. DDNS is a service for transforming
the dynamic IP corresponding to a specific "Hostname". For DDNS setup, please refer to the steps below.
‧ Go to a website which provides free DDNS services and apply a "Hostname".
For example, go to http://www.dyndns.com.
‧ Enter all the information necessary for signing up an account according to the website instructions.
Page 6
QUICK INSTALLATION