Dell Inspiron 14 Intel Manuel d'entretien - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 14 Intel. Dell Inspiron 14 Intel 48 pages. Service manual

Imprimer la page
Back to Contents Page
  Battery Latch Assembly
Dell™ Inspiron™ N4020/N4030 Service Manual 
  Removing the Battery Latch Assembly
  Replacing the Battery Latch Assembly
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on the back of the computer).
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
 Removing the Battery Latch Assembly
 
1. Follow the instructions in
Before You
 
2. Follow the instructions from
 
3. Remove the I/O board (see
 
4. Press and push the plastic clips on battery release latch to release it from the battery latch assembly.
 
5. Using a small screwdriver, remove the latch spring on the battery latch assembly.
 
6. Slide the battery latch assembly to the side and remove it from the computer base.
1 battery latch assembly
2 plastic clips
3 latch spring
 
 Replacing the Battery Latch Assembly
 
1. Follow the instructions in
Before You
 
2. Slide the battery latch assembly into place.
 
3. Using a small screwdriver, place the latch spring over the hook on the battery latch assembly.
 
4. Push the plastic clips on the battery release latch into the hole on the battery latch assembly to secure the battery release latch.
 
Begin.
step 2
to
step 13
in
Removing the System
Removing the I/O
Board).
 
Begin.
Removing the
Board.
Battery) before working inside the