Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2 Manuel d'entretien - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2. Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2 41 pages. Dell inspiron 1501 setting up
Également pour Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2 : Manuel de configuration (2 pages), Manuel de configuration (2 pages), Configuration de l'ordinateur (2 pages)
Imprimer la page
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, you must remove the main battery (see
begin working inside the computer.
Removing the Display Bezel
1. Follow the instructions in
Before You
2. Remove the display assembly (see
3. Remove the six rubber display bumpers.
4. Remove the six M2.5 x 4.2-mm screws around the display bezel.
1
rubber display bumpers (6)
NOTICE:
Removal of the bezel from the display back cover requires extreme care to avoid damage to the bezel.
5. Starting above the DELL™ logo on the display bezel, use your fingers to gently pull up on the bezel and pry it away from the display assembly. Working
your way around the display, continue to carefully pry up the bezel until you clear all sides of the display assembly.
1
display bezel
Replacing the Display Bezel
1. Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the display assembly.
2. Replace the six M2.5 x 4.2-mm screws around the display bezel.
Begin.
Removing the Display
Assembly).
2
M2.5 x 4.2-mm screws (6)
2
display panel
Before Working Inside Your
3
display bezel
Computer) before you