Dell Inspiron 5160 Manuel d'entretien - Page 21
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 5160. Dell Inspiron 5160 43 pages. Dell inspiron 5160: quick start
Également pour Dell Inspiron 5160 : Manuel de configuration (2 pages)
Imprimer la page
Video Card Assembly
Removing the Video Card Assembly
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in
"Preparing to Work Inside the
2. Remove the
hinge
cover.
3. Remove the keyboard.
4. Remove the
EMI
shield.
5. Pull straight up on the pull-tab that is attached to the display-feed flex cable to disconnect the cable from the video card connector.
6. Remove the two M2.5 x 8-mm screws that secure the video card assembly to the system board.
1 M2.5 x 8-mm screws (2) 3 video card
2 pull tab
4 pull tab for display-feed flex cable
7. Pull straight up on the attached pull-tab to lift the video card assembly off of the system board.
Installing the Video Card Assembly
1. Align the posts on the video card assembly with the screw holes in the system board.
2. Press down on the area on the video card assembly that is labeled "PUSH" until you feel the assembly click into place.
3. Replace the two M2.5 x 8-mm screws.
Palm Rest
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface.
Removing the Palm Rest
Computer."