Dell Inspiron 600m Manuel d'entretien - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 600m. Dell Inspiron 600m 40 pages. Hard drive
Également pour Dell Inspiron 600m : Commencer ici (2 pages), Commencer ici (2 pages), Commencer ici (2 pages), Manuel de démarrage (2 pages), Manuel de l'utilisateur (34 pages), Manuel de configuration (2 pages), Pour commencer (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel d'entretien (41 pages), Media Base User's Manual (26 pages), Manuel d'entretien (41 pages), Installation et configuration (38 pages), Démarrage rapide (2 pages), Démarrage rapide (2 pages), Démarrage rapide (2 pages), Configuration de l'ordinateur (2 pages), Manuel d'entretien (41 pages), Manuel d'entretien (4 pages)

Dell Inspiron 600m Manuel d'entretien
Back to Contents Page
  Cooling Fan
Dell™ Inspiron™ 700m Service Manual 
  Removing the Cooling Fan
 Removing the Cooling Fan
 
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read
"Before Working Inside Your
 
1. Remove the battery.
 
2. Remove the keyboard.
 
3. Disconnect the black and white antenna cables from the Mini PCI Card.
 
4. Remove the
display
module.
 
5. Remove the
palm
rest.
 
6. Remove the
system
board.
 
7. Remove the three M2 x 3-mm screws that secure the cooling fan to the system board.
1 system board connector
2 cooling fan connector
3 cooling fan
4 M2 x 3-mm screws (3)
 
8. Remove the tape that secures the cooling fan cable to the fan.
NOTICE:
Do not pull on the cooling fan cable. Pull from the cooling fan connector to disconnect the cable.
 
9. Disconnect the cooling fan cable from the system board connector.
 
10. Lift the cooling fan up and out of the bottom case.
Computer" before performing the following procedure.