DGT Projects XL Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DGT Projects XL. DGT Projects XL 4 pages. Chess clock

Imprimer la page

11. Canadian Byo-yomi

When the Byo-yomi method is active it is possible to reload the Byo-

yomi time for the player whose time is currently counting down by

pressing and holding the BACK button

for one second. After this

Byo-yomi time has appeared in the display a player must indicate their

turn is over.

Manual settings: Option 00

Option 00 offers the maximal freedom to set the DGT XL according to

your personal preferences. It is possible to choose from the different

timing methods, as well as to set your own preferred default settings,

or just to combine different systems. The maximum number of

personal default settings is 5; they can all be saved and recalled at a

time to your own choice.

When starting the DGT XL select option 00 using the

and press

to activate it.

1. Activating a default setting

To activate a default setting hold the Store button

seconds while the option digit is flashing.

(Load) will appear in the

left display. Then select one of the five default settings (1 .. 5, Fig. 2

B) by using the

buttons. Finally, press

choice. By pressing the Run/Pause button

setting is activated. By pressing the Run/Pause button

timer will be activated for the start of a new game.

2. Manual settings

In a manual setting you can create up to five consecutive periods,

setting a standard method (Time, Fischer, Bronstein Delay, Hourglass,

Upcount, Byo-yomi) for each period with desired values for both time

and number of moves.

A manual setting can be saved after input.

Choose Option 00.

On the left the number 1 will appear (Fig. 2 B) to indicate the first

period has to be set.

Select a timing method (Fig. 2 C) by proceeding to the desired method

using the

buttons buttons. Confirm by pressing

Set the standard time for the player on the left in the left display. Use

the

to the previous digit using the

Hours, tens of minutes, single minutes, tens of seconds, seconds.

Continue to the right display and repeat the procedure for the player on

the right.

When using 'Fischer' or 'Bronstein' Delay, subsequently set the extra

time per move or the delay time per move in minutes and seconds.

When using 'Fischer', you will also have to set the number of moves

for the first period afterwards.

When using 'Fischer' the following is of particular importance: When

using 'Fischer', it is possible to choose when to start the next period.

If you set the number of predetermined moves as 00, the next period

will start as soon as the first player has run out of time. However, if

you set a number between 01 and 99, the next period will start as

soon as the player has individually completed this number of moves.

buttons

If you just want to set one period, then proceed to END by pressing

buttons and confirm by pressing

If you want to set multiple periods, then first choose the timing

method you want to use for each period and then complete the

procedure per period as indicated above. After you have set the last

for a few

period, finish by pressing END.

Note: Not all sequences of methods are allowed to be set. If

logically a sequence of settings is impossible, it is impossible to

to confirm your

select these settings. If, for example, the second period has been

briefly this default

specified as Upcount, it is impossible to set a third period after

again, the

Upcount.

If you want to save the set time, hold the STORE button

seconds.

choosing the number (1 to 5) (Fig. 2 B) of the default setting using

buttons and confirm by pressing

pressing Run/Pause

Below you will find two examples of setting a program. On our

Internet site, www.dgtprojects.com, you will find more examples.

3. A simple example

Suppose you want to play a game with 15 minutes for the player on

the left and 30 minutes for the (slightly weaker) player on the right.

Suppose you want to save this as default setting number 3.

•

Select option number 00

•

Confirm by pressing

•

Select TIME

buttons and confirm by pressing

. It is possible to return

(BACK) button. Set after each other:

(Program) will now appear in the left display. Continue

.You can start the game by

•

Confirm by pressing

Set as follows: 0,

•

, 0,

•

Select END

•

Confirm by pressing

•

button for a few seconds

Hold the

•

Select default setting number 3

•

Confirm by pressing

4. A complex example

Suppose you want to play in 3 periods. 40 moves in 1 hour and 30

minutes, followed by 20 moves in 30 minutes, and finish playing

''Fischer'' with an extra 20 seconds attracted per move. Suppose you

save it as default setting number 5.

•

Select option number 00

•

Confirm by pressing

•

Select TIME

•

Confirm by pressing

•

Set as follows: 1,

, 0,

•

This completes period 1

•

Again select TIME

•

Confirm by pressing

•

Set as follows: 0,

•

This completes period 2

for a few

•

Select 'FISCH'

•

Set as follows: 0,

standard time) 0,

, 0,

(=number of moves 0, for a final period using

'Fischer' set 0 as the number of moves, for multiple periods set

the number of moves per period)

•

Select END

•

Confirm by pressing

•

Hold the

button for a few seconds

•

Select default setting number 5

•

Confirm by pressing

, 1,

, 5,

, 0,

, 3,

, 0,

, 3,

, 0,

, 1,

, 3,

, 0,

, 1,

, 0,

, (= 10 minutes

, 2,

, 0,

(=20 seconds extra per move)