Table 18. Power ratings (continued)
Description
Input voltage
Input frequency
Input current (maximum)
Output current (continuous)
Rated output voltage
Temperature range
Operating
Storage
Power supply connector
The following table lists the Power supply connector specifications of your OptiPlex 5400 All-in-One.
Table 19. Power supply connector
155 W (80 PLUS Bronze)
160 W (80 PLUS Bronze)
Display
The following table lists the display specifications of your OptiPlex 5400 All-in-One.
Table 20. Display specifications
Description
Display type
Display-panel technology
Display-panel dimensions (active area):
Height
Width
Diagonal
Display-panel native resolution
Luminance
Option one
90 VAC to 264 VAC
47 Hz to 63 Hz
3.6 A
● +19.5 VA/7.5 A
● +19.5 VB/7.0 A
Standby mode:
● +19.5 VA/0.5 A
● +19.5 VB/1.75 A
● +19.5 VA
● +19.5 VB
5°C to 42°C (41°F to 107°F)
-40°C to 70°C (-40°F to 158°F)
● One 16 pin connector for system board
● One 2 pin connector for LED
● One 16 pin connector for system board
● One 2 pin connector for LED
Option one (non-touch display)
Full High Definition (FHD)
Wide Viewing Angle (WVA)
296.46 mm (11.67 in.)
527.04 mm (20.75 in.)
604.70 mm (23.81 in.)
1920 x 1080
● 200 nits (minimum)
● 250 nits (typical)
Option two
90 VAC to 264 VAC
47 Hz to 63 Hz
3.6 A
● +19.5 VA/7.5 A
● +19.5 VB/7.0 A
Standby mode:
● +19.5 VA/0.5 A
● +19.5 VB/1.75 A
● +19.5 VA
● +19.5 VB
5°C to 42°C (41°F to 107°F)
-40°C to 70°C (-40°F to 158°F)
Option two (touch-display)
Full High Definition (FHD)
Wide Viewing Angle (WVA)
296.46 mm (11.67 in.)
527.04 mm (20.75 in.)
604.70 mm (23.81 in.)
1920 x 1080
● 200 nits (minimum)
● 250 nits (typical)
Specifications of OptiPlex 5400 All-in-One
27
Imprimer la page