Dell Latitude 5401 Manuel de configuration et de spécifications - Page 34
Parcourez en ligne ou téléchargez le pdf Manuel de configuration et de spécifications pour {nom_de_la_catégorie} Dell Latitude 5401. Dell Latitude 5401 44 pages.
Également pour Dell Latitude 5401 : Manuel de configuration et de spécifications (41 pages), Manuel de démarrage rapide (14 pages), Manuel de configuration et de spécifications (50 pages)
Imprimer la page
Option
Unobtrusive Mode
Miscellaneous Devices
MAC Address Pass-Through
Identifier
Status
Video
Option
Description
LCD Brightness
Allows you to set the display brightness depending up on the power source—On Battery and On AC. The LCD
brightness is independent for battery and AC adapter. It can be set using the slider.
NOTE:
The video setting is visible only when a video card is installed into the system.
Identifier
Status
Security
Table 33. Security
Option
Admin Password
System Password
Internal HDD-2 Password
Strong Password
Password Configuration
Password Bypass
34
System setup
Description
•
Enable Unobtrusive Mode (disabled by default)
When enabled pressing Fn+Shift+B will turn off all light and sound emissions in the system.
Press Fn+Shift+B to resume normal operation.
Allows you to enable or disable the following devices:
•
Enable Camera (enabled by default)
•
Enable Hard Drive Free Fall Protection(enabled by default)
•
Enable Secure Digital (SD) Card (enabled by default)
•
Secure Digital (SD) Card Boot
•
Secure Digital (SD) Card Read-Only Mode
•
System Unique MAC Address (disabled by default)
•
Integrated NIC 1 MAC Address
•
Disabled
The feature replaces the external NIC MAC address (in a supported dock or dongle) with the
selected MAC address from the system. The default option is to use the Passthrough MAC address.
GUID-23ACB530-9D5D-4C14-A1AA-91245F72B3EB
Released
GUID-56AEA98C-A20E-4E08-A890-4E90CB1DC534
Released
Description
Allows you to set, change, and delete the admin password.
Allows you to set, change, and delete the system password.
This option lets you set, change, or delete the password on the system's internal hard disk drive
(HDD).
This option lets you enable or disable strong passwords for the system.
Allows you to control the minimum and maximum number of characters allowed for a administrative
password and the system password. The range of characters is between 4 and 32.
This option lets you bypass the System (Boot) Password and the internal HDD password prompts
during a system restart.
•
Disabled — Always prompt for the system and internal HDD password when they are set. This
option is enabled by default.
•
Reboot Bypass — Bypass the password prompts on Restarts (warm boots).
NOTE:
The system will always prompt for the system and internal HDD passwords
when powered on from the off state (a cold boot). Also, the system will always prompt
for passwords on any module bay HDDs that may be present.