Dell P94F001 Manuel de configuration et de spécifications - Page 30
Parcourez en ligne ou téléchargez le pdf Manuel de configuration et de spécifications pour {nom_de_la_catégorie} Dell P94F001. Dell P94F001 46 pages.
Imprimer la page
Table 25. Security(continued)
Option
System Password
Strong Password
Password Configuration
Password Bypass
Password Change
Non-Admin Setup
Changes
UEFI Capsule Firmware
Updates
TPM 2.0 Security
Absolute®
30
System setup
Description
Allows you to set, change, or delete the System password.
The entries to set the password are:
•
Enter the old password:
•
Enter the new password:
•
Confirm new password:
Click OK once you set the password.
NOTE:
For the first time login, "Enter the old password:" field is marked to "Not set". Set
the password for the first time and later you can change or delete the password.
Allows you to enforce the option to always set the strong password.
•
Enable Strong Password
This option is not set by default.
You can define the length of your password. Min = 4, Max = 32
Allows you to bypass the System password and the Internal HDD password, when it is set, during a
system restart.
Click one of the options:
•
Disabled—Default
•
Reboot bypass
Allows you to change the System password when the administrator password is set.
•
Allow Non-Admin Password Changes
This option is set by default.
Allows you to determine whether changes to the setup options are allowed when an Administrator
Password is set. If disabled, the setup options are locked by the admin password.
•
Allow Wireless Switch Changes
This option is not set by default.
Allows you to update the system BIOS via UEFI capsule update packages.
•
Enable UEFI Capsule Firmware Updates
This option is set by default.
Allows you to enable or disable the Trusted Platform Module (TPM) during POST.
The options are:
•
TPM On—Default
•
Clear
•
PPI Bypass for Enable Command—Default
•
PPI Bypass for Disbale Command
•
PPI Bypass for Clear Command
•
Attestation Enable—Default
•
Key Storage Enable—Default
•
SHA-256—Default
This field lets you Enable, Disable, or Permanently Disable the BIOS module interface of the optional
Absolute Persistence Module service from Absolute® Software.